Compare
PG 8504 [AD]
Laboratory glassware washer with DI water supply.
- Perf./cycle, e.g., 64narrow necked/laboratory glassware w/ injector nozzlesFurther stacking options
At the same time it is possible to reprocess other laboratory glassware in the upper basket. - Efficient use of resources - variable speed heater pumpThe heart of perfect results
The speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements In the individual program blocks – high pressure facilitates the removal of stubborn soiling, while low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times. - Dispense process chemicals easily: Powder dispenser in the door
- With Di water connection – final rinse with fully demin. water
String El. connection Standard
Product benefits
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Clear text display
Text display
Everything at a glance: The display shows everything as clear text in the country-specific language.
Large selection of components
Reprocess flexibly
Flexible and comprehensive components for optimum cleaning performance and a variety of reprocessing options.
Can be built under a countertop
For a consistent look
The machine can be easily integrated under a countertop.
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.
Product details
PG 8504 [AD]
EAN 4002515644904 / Article number 62850401CDN / Material number 10254290
EAN 4002515644904 / Article number 62850401CDN / Material number 10254290
| Construction type | Freestanding appliance, can be built-under, slim |
|---|---|
| Outer casing | Stainless steel |
| Can be built-under | |
| Electric door lock | |
| Buzzer, acoustic signal at end of program | |
| Easy-to-service construction |
| Narrow necked glassware per cycle [number] | 64 |
|---|
| Circulation pump, Qmax in gal/min (l/min.) | 132.1 (500) |
|---|---|
| Maximum final rinse temperature in °F (°C) | 158 (70) |
| Usable wash cabinet volume in ft³ (l) | 5.12 (145) ft³ (l) |
| Tested operating hours Note Our machines undergo intensive testing under laboratory conditions. The actual operating hours may vary depending on actual usage behaviour, maintenance, and care of the machine. | 15000 |
| Control type | TouchControl |
|---|---|
| Program selection | Touch on metal Touch on Metal Greater user convenience and easy surface cleaning. |
| Short cut buttons | |
| Max. delay start in h | 24 |
| Programmability | programmable |
| Programs [number] | 6 |
| Free program slots [number] | 2 |
| Automatic program restart | Program failure protection Time-saving and safe: The program failure protection facilitates the continuation of the cleaning and disinfection process after a short interruption, such as a power cut. If the success of the reprocessing process should be at risk, the appliance issues a corresponding warning message. |
| Time left display | |
| Program sequence indicator | |
| Choice of display language |
| Electrical connection | 3 AC 208V 60HZ |
|---|---|
| Electric heater rating in kW | 5.4 |
| Total rated load in kW | 6.1 |
| Fuse rating in A | 20 |
| NEMA plug: Twist Lock L15-20 | |
| Length of power cord in ft (m) Note The length refers to the supply lead on the outside of the appliance. | 5 (1.8) |
| Electrical connection | 2 AC 208V 60HZ |
|---|---|
| Electric heater rating in kW | 5.4 |
| Total rated load in kW | 6.1 |
| Fuse rating in A | 30 |
| Cold water [number] | 1 |
|---|---|
| Fully demineralized water [number] Di water supply Thanks to the connection for fully demineralized water (demin. water), these washer-disinfectors achieve optimum reprocessing results. Rinsing with demin. water also protects valuable wash items from deposits and corrosion. | 1 |
| Required flow pressure in kPa Notes for variants with feed pump for DI water This value applies to cold, hot, and demin. water; however, it does not apply to the demin. water intake for the highly purified water variants as a feed pump is used in this case. | 200-1000 |
| Maximum drain pump height (delivery head) in in (cm) | 39 3/8 (100) |
| Integrated water softener | |
| Maximum water hardness (cold water / hot water) in (mmol/l) | 62.595 (10.7) |
| Drain pump [DN] | 0.866 (22) |
| Water protection system Waterproof System (WPS) Protection against flooding: In the event of problems, the system stops water intake automatically. | Waterproof system |
| External dimensions, net height in in. (mm) | 32 7/8 (835) |
|---|---|
| External dimensions, net width in in. (mm) | 23 5/8 (600) |
| External dimensions, net depth in in. (mm) | 23 5/8 (600) |
| Packaging dimensions, gross height in in. (mm) Note Including packaging | 37 1/16 (940) |
| Packaging dimensions, gross width in in. (mm) Note Including packaging | 26 5/8 (675) |
| Packaging dimensions, gross depth in in. (mm) Note Including packaging | 29 3/8 (745) |
| Wash cabinet, usable height in in. (mm) | 20 1/2 (520) |
| Wash cabinet, usable width in in. (mm) | 20 7/8 (530) |
| Wash cabinet, depth of upper basket in in. (mm) | 18 11/16 (474) |
| Wash cabinet, depth of lower basket in in. (mm) | 20 1/2 (520) |
| Net weight in lb (kg) | 158.733 (72) |
| Gross weight in lb (kg) Note Including packaging | 174.165 (79) |
| Maximum floor load in N/m² Maximum floor bearing capacity Maximum floor bearing capacity states the maximum weight (N) that can be placed on the supporting surface on which the appliance is installed. This maximum load bearing capacity is the result of adding up the weight of the machine, the load and the water in it, as well as the dynamic forces that occur during operation. | 1200 |
| Emission sound pressure level in the workplace Emission sound pressure level at the workplace The emission sound pressure level provides a value for the noise created by the machine. Miele Professional appliances have an extremely low sound pressure level. | <lt/>70 dB(A) re 20 µPa |
|---|---|
| Heat dissipation into the room in MJ/h Heat output into the room During operation warm air is vented into the surrounding room. The released amount of heat/time depends on the set temperatures and the intensity of use. The stated maximum value can be used to control the temperature of the area or to calculate an increase in room temperature. | 1.1 |
| Short | |
|---|---|
| Medium | |
| Long |
| External dispenser modules |
|---|
| RoHS Directive 2011/65/EU |
|---|
Additional accessories and consumables
Find additional accessories and consumables to go with this product
Additional accessories for laboratory technology
Find here the accessories that can be bought additionally for this product.
Additional consumables for laboratory technology
Find here the consumables that can be bought additionally for this product.