Water in wash cabinet

Clean the filter combination as follows:

• Turn off the dishwasher.

• 

• Turn the handle to release the filter combination (1).

• Remove the filter combination (2). Remove any coarse particles and rinse the filter well under running water. Use a soft cleaning brush to remove soiling.

Additional information can be found in the linked video.

Be very careful not to damage sensitive components when cleaning the drain pump and the non-return valve. Proceed as follows:

• Disconnect the dishwasher from the power supply. To do this, pull out the dishwasher’s electrical plug or deactivate the building fuse.

• Scoop the water out of the wash cabinet using a small container.

• 

• Press the catch for the non-return valve inward (1).

• Pull out the non-return valve. Rinse the non-return valve well under running water (2).

• 

• Remove any foreign objects from the non-return valve.

  The drain pump is situated under the non-return valve.

• Carefully remove any foreign objects from the drain pump.

• Check the drain pump impeller by manually turning it. You will feel a little resistance when you turn the impeller.

• Ensure that the catch engages correctly!

• Carefully reinstall the non-return valve.

Remove any kinks from the drain hose.