The robot vacuum cleaner is switched off.
Depending on the model, switch the robot vacuum cleaner on using the switch on the side:
Set the I/0 switch to the I position.
Set the ON/OFF switch to the ON position.
Support for yourRobot Vacuum Cleaner
Robot Vacuum Cleaner
Robot vacuum cleaner unresponsive
The robot vacuum cleaner does not respond to operation.
The signal between the infrared transmitter on the remote control and the receiver on the robot vacuum cleaner has been interrupted.
Carefully clean the upper side of the remote control and the receiver on the robot vacuum cleaner with a soft, dry cloth.
Make sure that no objects disrupt the signal.
RX2 and RX3: The receiver is located on the front of the robot vacuum cleaner.
RX1: The receiver is located on the robot vacuum cleaner between the program selection symbols; the red circle marks the position in the figure.
The remote control batteries have been inserted incorrectly.
Check the position of the batteries and make sure the polarity is correct; see figure.
The batteries in the remote control are empty.
Replace the batteries in the remote control. Make sure the polarity is correct.
The remote control is too near to the robot vacuum cleaner or too far away from it.
Increase or decrease the distance and when using the remote control, direct it toward the robot vacuum cleaner.
The robot vacuum cleaner’s battery is empty.
RX2 and RX3:
Connect the robot vacuum cleaner correctly to the charging contacts on the connected base station.
RX1:
Connect the robot vacuum cleaner correctly to the charging contacts on the connected base station.
Alternatively, charge the battery using the power supply unit. The charging socket for the electrical plug is located right next to the ON/OFF switch.
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
