Miele Steam Oven | Fault F05 is shown on the display of the steam oven/combi-steam oven.

The water intake valve is not fully open.

Open the water intake valve fully and start operation again.

The water nozzle must be descaled if the fault message F05 appears on the display.

Risk of injury caused by hot surfaces and steam.

A great deal of hot steam will escape when the door is opened. The oven compartment walls, food, and accessories get very hot during cooking.

Open the door carefully. Use pot holders when removing food from the oven and when working in the hot oven compartment.

To descale the nozzle, proceed as follows:

Wait until several audible signals sound.

Open the door and remove the food.

Leave the door open to cool down the steam oven.

Remove the side runners.

Pull out the nozzle.

Descale the nozzle using the Miele system descaling agent or with a suitable proprietary descaler.

After descaling, rinse the nozzle under running water.

Before reinstalling the nozzle, all parts of the steam oven which carry water must be flushed through.

Close the door and turn the steam oven on. Select the Steam cooking operating mode at 212°F (100°C).

Set a duration of 1 minute and press the Start/Stop button.

Wait until the cooling-down phase has been completed, then open the door and reinstall the nozzle and the side runners.

The steam oven can now be used again as normal.

If the fault persists, please contact Miele Service or book a repair appointment online.

For thorough and gentle cleaning of your steam oven, it is recommended to use Miele products which also care for your appliance at the same time.