The nozzle at the top of the door sealing ring is blocked.
Carefully remove the lint with your finger.
Support for yourWasher
Fault F210
Fault F210 appears in the washing machine display. There is a fault with the suds circulation system.
The drain filter is blocked.
There is a danger of scalding yourself when you open the drain filter if laundry has just been washed at a high temperature.
When the drain filters are opened, water will come out of the drain filter housing. If the drain outlet is blocked, there may be a large quantity of water left behind in the drum.
Place a suitable container under the access panel.
Unscrew the drain filter slowly to drain the suds.
Press the drain filter gently into the housing as you are unscrewing it to prevent it from suddenly falling out.
Screw in the drain filter to close it.
Clean the drain filter and the drain pump:
Turn off the washing machine.
Open the access panel for the drain pump.
Place a suitable container under the access panel, e.g., a universal tray.
Slowly unscrew the drain filters to let the water out.
Tighten the drain filters back up again if you need to interrupt the flow of water.
If no water flows out, unscrew the drain filters completely.
Clean the drain filters thoroughly.
Check the drain pump impellers to make sure they can rotate freely. If necessary, remove any foreign objects (e.g., buttons, coins, etc.) and clean the interior.
Put the drain filters back in place. Please note that each drain filter must be inserted on the correct side.
Screw the drain filters tight.
If the drain filters are not screwed tight, water may leak out.
Leaking water can cause damage.
Check that the drain filters have been inserted correctly and are screwed tight.
Close the access panel for the drain pump.
If the fault persists, please contact us or book a repair appointment online.
The washing machine can still be used but with reduced functionality.
Additional media
Operating Instructions finder
Here you will find the operating instructions for your Miele appliances
Find your manual
