The transport safety device is still mounted.
Remove the transport safety device.
There are vibrations during the spin cycle of the washing machine.
Remove the transport safety device.
The 4 adjustable screw feet are used to level the washing machine. All of the feet are screwed in when the machine is delivered.
Using the wrench supplied, turn the counter nut (2) in a clockwise direction.
Then turn the counter nut (2) together with the foot (1) to unscrew.
Use a level to check that the washing machine is level.
Hold the foot (1) securely with water pump pliers.
Turn the counter nut (2) again using the wrench supplied until it sits firmly up against the housing.
A concrete floor is the most suitable base for a washing machine.
If possible, install the washing machine in a corner of the room.
If installing the washing machine on a wooden floor, place it on a plywood panel that has several joists running all the way underneath it, making sure the panel is connected to the joists and not just the floor boards. Minimum size of plywood panel: 23 1/4" x 20 1/2" x 1 3/16" (59 x 52 x 3 cm).