Compare
A 862
Holding frames for A 302/2 and A 302/3 injector modules.
- Arrangement: 4 x 8 fields
- For use on A 302/2 and A 302/3 injector modulesNote
The holding frame clicks into place on the injector module. - For the optimum positioning of laboratory glasswareNote
The holding frame enables laboratory glassware to be positioned ideally for the best possible cleaning results. The glassware is also protected against damage. - Plastic-coated
Product details
A 862
EAN 4002516087687 / Article number 69686200D / Material number 11056820
EAN 4002516087687 / Article number 69686200D / Material number 11056820
| Glassware washers, laboratory | |
|---|---|
| Large-capacity washer-disinfectors, laboratory |
| PG 8504 | |
|---|---|
| PG 8583 | |
| PG 8583 CD | |
| PG 8593 | |
| PLW 7111 |
| Other inserts / other modules |
|---|
| Material | Stainless steel Plastic Wire, rilsan-coated |
|---|---|
| Colour | Stainless Steel Black |
| Number of compartments | 32 |
| Compartment width in mm | 2 1/4 (56) |
| Compartment length in mm | 2 1/16 (52) |
| Part of SimpleLoad system |
| Reprocessing of laboratory glassware |
|---|
| Number of phases | 0 |
|---|---|
| Voltage in V | 0-0 |
| Frequency in Hz | 0-0 |
| Total rated load in kW | 0-0 |
| Fuse rating in A | 0-0 |
| External dimensions, net height in in. (mm) | 1 3/16 (30) |
|---|---|
| External dimensions, net width in in. (mm) | 9 7/8 (250) |
| External dimensions, net depth in in. (mm) | 13 13/16 (350) |
| External dimensions, gross height in in. (mm) Note Including packaging | 1 7/16 (35) |
| External dimensions, gross width in in. (mm) Note Including packaging | 11 13/16 (300) |
| External dimensions, gross depth in in. (mm) Note Including packaging | 15 3/4 (400) |
| Net weight in lb (kg) | 1 (0.1) |
| Gross weight in lb (kg) Note Including packaging | 1 (0.186) |
Downloads
Notes
Subject to technical changes; no liability accepted for the accuracy of the information given! Figures as examples for showing the product benefit.