It's time to change.
Glitch-free and fast experiments and analyses are a quality feature in any laboratory. Reliably cleaned laboratory glassware is a prerequisite: Only this approach is able to guarantee reproducibly good results. Manual cleaning, however, is hardly able to ensure consistently good results in the reprocessing of glassware. And there are numerous other downsides. Only machine-based reprocessing ensuring analytical levels of quality guarantee the consistency and precision required in everyday laboratory life.
Increase efficiency. Save time. Conserve resources.
Compared with manual cleaning, a laboratory glasswasher is able to reprocess more glassware and utensils in the same space of time.
The efficient and precisely metered use of water saves valuable resources.
Professional laboratory glasswashers achieve the desired results in a shorter time.
ExploreLine Lab Washer PG 8504
The lab washer solution for the simple, safe and cost-effective cleaning of laboratory glassware.
Our ExploreLine lab washer represents the effective and economical reprocessing solution for small laboratories, e.g. in schools, universities and small businesses (e.g. water analysis laboratories) and, in fact, anywhere requiring simple reprocessing solutions.
Lab Washer PG 8504
Greater capacity
Up to 64 injector nozzles when using two laboratory glassware modules. Optimized chamber dimensions and a completely overhauled load carrier program saves time, storage space and costs.
Short cycles
60 glasses cleaned in 36 minutes in standard program. This increases throughput and speeds up reprocessing during peak periods.
Greater purity
Excellent cleaning performance and the efficient use of resources thanks to variable-speed heater pump. For perfect spray pressure in all program phases.
Two levels
Use of two SimpleLoad modules on one level. Use of second level for baskets and inserts. This ensures maximum flexibility in, for example, reprocessing beakers.
Greater flexibility
The modular approach to baskets offers a large number of combination options for intuitive operation. Reduction in number of load carriers needed saves both on investments and storage space.
Greater Hygiene
Laser technology is used to weld the chamber, resulting in a finish without nooks or crannies where soil can accumulate. The relocation of heater elements to outside the chamber guarantees even greater hygiene.
The choice is yours
Select your desired machine here and request a quote online:
-
Perf./cycle, e.g., 64narrow necked/laboratory glassware w/ injector nozzlesFurther stacking options
At the same time it is possible to reprocess other laboratory glassware in the upper basket. -
Efficient use of resources - variable speed heater pumpThe heart of perfect results
The speed of the pump and thus the wash pressure is adjusted in line with the relevant requirements In the individual program blocks – high pressure facilitates the removal of stubborn soiling, while low pressure guarantees the complete wetting of all the wash items. As a result, the consumption of water and energy remains particularly low with optimum wash pressure at all times. -
Dispense process chemicals easily: Powder dispenser in the door
-
With Di water connection – final rinse with fully demin. water
Matching accessories and detergents
From SimpleLoad modules and baskets to matching process chemicals - select additional components here for a customized all-in-one package.
-
Vertical clearance 160 +/- 30 mm, width 475 mm, depth 443 mm
-
With integrated spray arm
-
Vertical clearance 205 +/- 30 mm, width 475 mm, depth 443 mm
-
With integrated spray arm
-
Lower basket with two module connections
-
for holding up to 2 injector modules or inserts
-
Automatic closing of the connections when not in use
-
Clearances: width 494, length 440 mm
-
Vertical clearance dependent on upper basket selectedLoading height
Vertical clearance in combination with:A 100: height 240 mmA 101: height 265 +/- 30 mmA 102: height 225 +/- 30 mmA 103: height 305 mmA 104: height 145 mmA 105: height 210 mmWithout upper basket: 495 mm -
Loading width: 490 mm, loading depth: 498 mm
-
Suitable for lab. glassware such as Erlenmeyer and round flasks.
-
Equipped with 4 A 840 nozzles and 4 A 841 nozzlesNote
Size of A 840 injector nozzle:– Ø 6 mm, height 130 mmSize of A 841 injector nozzle:– Ø 6 mm, height 210 mm -
Part of SimpleLoad systemSimpleLoad
The SimpleLoad system makes the reprocessing of laboratory glassware considerably faster, simpler and safer. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as the height adjustment of holders is no longer necessary, thanks to the smart combination of nozzles and holding frames. As a result, correct positioning is easier than ever before. -
Nozzle spacing 118 mm across the width, 118 mm across the depth
-
Suitable for lab. glassware such as Erlenmeyer and round flasks.
-
Equipped with 9 A 842 nozzles and 9 A 843 nozzlesNote
Size of A 842 injector nozzle:– Ø 4 mm, height 90 mmSize of A 843 injector nozzle:– Ø 4 mm, height 185 mm -
Part of SimpleLoad systemSimpleLoad
The SimpleLoad system makes the reprocessing of laboratory glassware considerably faster, simpler and safer. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as the height adjustment of holders is no longer necessary, thanks to the smart combination of nozzles and holding frames. As a result, correct positioning is easier than ever before. -
Nozzle spacing 78 mm across the width, 78 mm across the depth
-
Suitable for lab. glassware such as Erlenmeyer and round flasks.
-
Equipped with 16 A 844 nozzles and 16 A 845 nozzlesNote
Size of A 844 injector nozzle:– Ø 1/8", height 3 1/8" (2.5 mm, height 80 mm)Size of A 845 injector nozzle:– Ø 1/8", height 5" (2.5 mm, height 125 mm) -
Part of SimpleLoad systemSimpleLoad
The SimpleLoad system makes the reprocessing of laboratory glassware considerably faster, simpler and safer. The biggest benefit afforded by the new system is that load items can be positioned over nozzles both more simply and faster as the height adjustment of holders is no longer necessary, thanks to the smart combination of nozzles and holding frames. As a result, correct positioning is easier than ever before. -
Nozzle spacing 60 mm across the width, 57 mm across the depth
-
Foam damping effect, free from oxidantsIngredients
30% phosphates -
Suitable for the reprocessing phases in washer-disinfectors
-
Suitable for all types of materials
-
pH value 12,0
-
Free from phosphorous compounds, oxidising effectIngredients
5% non-ionic surfactants, 5–10% oxygen-based bleaching agent -
Specially developed for Miele Professional
-
Suitable for all types of materials
-
pH value 13,0-14,0
- 1.Savings with PG 8504, heating: 8.5 kW (3N AC 400 V 50 Hz), connection to cold water and demineralized water (15 °C). Other technical conditions may result in different values.